torsdag den 17. juli 2014

Complete introduction to buying from Silk Road.

Version 2 of: A complete guide to Silk-Road




Alright.. So! This guide is intended for some Nordic friends of mine, therefore, Bitcoinnordic will be used as the "main source" from where you can get Bitcoins in this guide. 

But! Let's begin.

Part 1: Wallet creation
1) First off, you need a wallet. A wallet to hold all your funds, in Bitcoins. I prefer (and use) Blockchain as my wallet provider. You can head there now:
https://blockchain.info/ . The site will look something like this:


1.1) Now, go to the "Wallet" (click on the link) section, and click the "Create a new wallet" button, as seen on the picture:


1.2) Fill out the required information, and REMEMBER it! This is your only access to your Bitcoin funds.



1.3) There'll open up a windows after you press "continue" with some very important information. IF you lose your password, this "phrase" is the only way back. Press "Continue" when you've reviewed the information, and written down the important information.

1.4) You'll now be presented with the login-screen and with a "identifier". It'll work as your account-name as you know from any other site that requires accounts. You don't have to remember this, because it's on your email, always. Look at the image if you don't get it!


1.5) OPEN YOUR WALLET! (Login!)


Part 2:
 Creating one/multiple Bitcoin wallet(s).
2) This will be the windows that you see the moment you log-in / open your wallet. Remember!! - If you're inactive for more than 5-8 minutes, you'll get kicked off, and you'll have to login again. This is done 'cause of pure security reasons.

2.1) The site works as follows.. You got these sections:
- Wallet home (Look at your total account balance.. How much money do I got?? How much did I ever send? How much did I receieve?). All of these information can be found in a short version here.

- My transactions .. Kind of self-explanatory. Here you can find all your transactions between your wallets. Remember, everyone can see everything on the Bitcoin network. Your anonymity lies in your own doings, meaning, that don't ever put any official name anywhere on this site if you choose to go the "Silk-road" way.

- Send money.. You can send money from here, and you can see a short list of your bitcoin wallet addresses. We'll get to this in the next step. But from here is where you transfer your fresh Bitcoins into your silk-road wallet(s). Silk-road OF COURSE got its own wallets, so that you don't have to use your own. Some people don't like this, and some do. I like it. But, we'll get to the "money-transfering" part later.

- Receive money.. Is where you can see in-depth "analysis" of your bitcoin wallet addresses. You can see a beatiful list of all your addresses, basically. This is needed, when you need to find your own Bitcoin wallet address(es) - if somebody ever wanted to transfer money to you.

- Import / export .. Is for the advanced users. From here you can manage your master key (contains information how to open up your Bitcoin wallet), and download it for personal and offline use. I do not recommend this, as this controls your entire account. So.. Just let it be. Ignore this section, except if you REALLY need something in there.


2.2) Alright.. Now to create a few more wallets, so you have a few places to chose where you want to order your Bitcoins to. Head to the "Receive money" section. You'll (hopefully) see a window looking like this:

2.3) Press the "New address"-button, and a window like this should appear:

2.4) You should now return to the windows from 2.2, but now with a new address! If you entered something in the "Label" section, it should now be visible on the "receive money" page.



2.5) Good! Now you're actually ready to order up some Bitcoins. 

Part 3: Getting Bitcoins!
3) If you live in Scandinavia, there's a very easy method to get Bitcoins. There's "Bitcoin Nordic" (link)! Which is even easier if you have Danske bank / Nordea. You'll get your Bitcoins the same day, if you do the bank transfers before 15:00 (Danish time, GMT+1). The other way is of course, mining, but I wont get into that in this guide. 


3.1) Well, I assume you're a Scandinavian. Else, I can't get this guide to work.. I've done the bank transfers a few times and have had great success. There are some parts that I can't show you, and some that I can. Mainly because that I can't buy any Bitcoins at the moment, since I'm broke as f*ck. But! Head to the https://bitcoinnordic.com/ site. You should see this:



3.2) You should now see this wonderful page. Fill it out: (Look at the picture if you're totally lost)



3.3) It should look something like this:



3.4) After accepting their terms and so on, and pressing "Submit" (at the bottom) you'll receive an email containing important information. When you transfer the money, there's a message field available, and in there you should put the code that he sent to your mail. In Nordea, it could end up looking like this (in "Netbank"):
3.4.1) Picture of email:



3.4.2) Picture of how it should look in your 'Netbank', right before you transfer:


3.5) As said in step 3.0, if you did this before 15.00 on a normal work-day, it should be there the same day, sometimes you only have to wait an hour or something. Now you can check your Blockchain "receive money" section and wait for something to "pop up". 

Part 4: Silk Road Time!
4) Lets just imagine that you've received your money now. In Bitcoins! Now, we need to get you on Silkroad. To do that, start of by download and extracting the TOR BROWSER BUNDLE. When you've done that, open and connect:


4.1) Go and create an account at Silk Road. The ONION-Url is: [ silkroad6ownowfk.onion ]. 
Alright.. Double check that you've got the right URL. If you used the one from above, you're good to go. If not, take care, man. There are loads of scamming sites that look identical! Remember to turn off ALL scripts. Then can be done be clicking the highlighted icon (on the picture). 
IMPORTANT: When asked for a PIN-key, REMEMBER IT!!! You need to get through with your order. This is so damn important. Don't EVER forget your PIN-key. 

4.2) You're now in. Inside the wonderful market.. Of (un)limited drugs! Now, head to your "account" page 
[ silkroad6ownowfk.onion/account ]. Here, you'll find a list of silk-road bitcoin addresses.. My page looks like this:





4.3) Choose one of the 5 addresses. It doesn't matter which one.. Somehow, they're all connected. Copy that, and return to your Blockchain. You need to transfer your funds from Blockchain to your Silk-road wallet. Scary? Yes. Fuck it? Yes! You're secure enough for now. We'll get to that part later.. 
Go back to your Blockchain wallet, into the "Send money" section:


4.4) There'll pop a window up, asking you to confirm. So.. Confirm! (Maybe it doesn't. It'll make a loud "BEEEP" noise when the Bitocins have been sent. It takes about 20-60 minutes before your coins will arrive at your Silk road address. This is because the Bitcoin network has to "confirm" the transaction, which takes a while. You can add a 'miners fee/transaction fee' in the "Custom" sub-menu which will make it go a lot faster.
4.4.1) This can be found here:


4.5) Send the payment and wait for it to arrive on your Silk Road account. You can go into your account settings [ silkroad6ownowfk.onion/account ] and press the "Check deposit addresses for new deposits" which is found here: 

4.5.1) When they arrive, you should be able to see your balance at the top of the same page:


Part 5: Encryption, and some more information. This is crucial information!
5) Now, you should have your Bitcoins in the silkroad market, and you're practically ready to buy drugs or whatever you want to use the market to. But, before you can begin you need to learn a small bit of encryption, namely the "PGP" Encryption. It stands for "Pretty Good Privacy" and is quite basic to use. It's widely used on all the "black markets" and is very needed if you want proper protection. I already wrote a guide on how to do this, but the application used is not as safe as the one I will introduce to you now.

5.1) The program is called GnuPT and is used to encrypt and decrypt messages using "public keys" and "master keys".. To explain this the easiest way, the master key is the one you keep for yourself, it's the one that you can sign messages with (if you need to prove that it really is you), and it's the key you use to decrypt with (I guess). The public key is the one that you can share, if you want other to contact you (mainly for the dealers on the market) or if you want the dealer to know if it really is you (sign the encrypted message). This is not needed when contacting/communicating with the dealers - you only need to encrypt your message with the dealers public key. We'll get to that soon! If you just want to buy on the market, you don't really need to share your public key.
You can download the application here: >Link<
5.1.1) Extract the .zip, and run the "gnupt_0.0.0.exe" (mine version is 5.4.0, but it does update sometimes).
5.1.2) When you get to this window, select the "WinPT 1.5.3" instead of "WinPT 1.4.3", as shown on the picture below:

5.1.3) In the next window, I chose to associate the program with the filetypes it suggested:

5.1.4) It will probably open up a webpage for some reason, just close it. When that's done, just select "Run WinPT" at the final window: 


5.2) This window will open up when you launch - select "Generate a GnuPG key pair":


5.2.1) The next window will tell you to enter your real name and email, but of course, don't do that. Enter something that absolutely no one can relate you to. Something that you've never used anywhere. Example given:



5.2.2) Next phase is the "key generation". Be careful, and remember this key. You're going to need this from time to time. Enter something that you're sure to remember, because there's no "Forgot my passphrase" option. There are no requirements for the password..


5.2.3) Something like this will come up, and just select "OK" after the Key Generation is completed.

5.2.4) Select YES to backup your keyrings, but do that in a safe place, that you can remember. This is used if you want to transfer your contacts and your master key around.


5.2.5) You're now ready to go find a dealer.


Part 6: Buying wares properly on Silk Road.
6) Find your preferred drug, or whatever on the silkroad page - I chose Cannabis. 


6.1) I selected "DxtchMxgic" (slurred it a bit.. This is clearnet afterall) and opened his Vendor profile. You should see something like this:

6.1.1) The "PGP Key" section should look something like this:


6.2) Okay.. Now, copy everything inside that box, like so:

6.2.1) Open up the "Key manager", by right-clicking the "Windows Privacy Tray" icon from your 'system tray' (right corner of your PC..)

6.2.2) The key manager will now open up. Select Edit -> Paste .. And the key from before should now be pasted in. If you can't, just try and copy the PGP Key from step 6.2. 

6.2.3) A "key import" window should now pop up - and then, press "Import" (as shown on the picture).

6.2.4) It should now appear in your key manager:

6.3) Now, select an item from your preferred dealer. I recommend always checking their ratings before ordering! As I don't currently hold any funds on my Silk Road account, I'll have to select a random free item, but let's just imagine it was a "DxtchMxgic" item. I did some noobish ms-paint job to make it look like it's a "DxtchMxgic" item. But don't really mind that.. The important part here is the "shipping address" part.
It should look like this: ... But for now, just leave it like that.


6.3.1) Go back to the "Windows Privacy Tray"-icon in your system tray in the right corner of your desktop. Right click it, and select "Clipboard -> Edit" - like so:


6.3.2) The clipboard editor will now open up. This is where the encryption happens! So, write your address here. Make sure to put your real name and address here, or else your package wont end up at your house. Some people use "dead drop offs" which are buildings with no owners, but with functional mailboxes. 
But, just use your home address, and your own name. The encryption will make it secure!
It could look like this: 


6.3.3) Now, select GPG -> Encrypt. 


6.3.4) Select your dealers key - in my situation that's DxtchMxgic - and select "OK".


6.3.5) Instantly after you pressed okay, another box will appear. Just select "No".

6.3.6) Now, you'll have your encrypted message. You're going to have to insert all of this text into the "shipping address" field shown in step 6.3. It should end up looking like this:


7) Press the "Place order" button, and you should now officially be done. 
You can check the "orders" section at [ silkroad6ownowfk.onion/orders ]. There you can follow what's happening. Usually the dealer notifies you when the item's sent.


8) OTHER GOOD THINGS TO KNOW: 
When choosing "shipping options", always go for "priority" mail. And look for EU/International when ordering, if you're living in EU. The dealers are really scattered around the globe, so sometimes they can't even ship to your country. So.. Always read their profile page and their ratings. There are a lot of scammers, so look for good ratings ALL over! :-)



Happy hunting, and be secure! 
> REMEMBER TO ENCRYPT ALL YOUR OUTGOING MESSAGES ON SILKROAD <

If you got any further questions, leave a comment or something. 

onsdag den 27. november 2013

PGP Encryption/GPG4Win Tutorial

PGP Encryption, and a Quick How-To

for Windows ..

I would like to introduce this by saying that I'm only using this for contacting other people with.. I'm not very experienced in this, other than daily uses, like Silk Road and other.... Markets! I'll try to add pictures to every step.

If you have no clue what PGP is, I'll try to explain it.. PGP stands for "Pretty-Good-Privacy", and that is very true. PGP is used for secure communication, encrypting all kinds of data so that only your receiver can decrypt (read) what you're sending.
Lets say that you want to say something very secret to someone, and you don't want anyone but that person to find out what you want to say. You could use Facebook, which is not very secure. No encryption, and there's surely laws enough for the Police to interfere with your account - without your permit.
But then, you could also use PGP! Now, to explain how this works, you would need to know a little thing about "keys". The keys are what PGP are all about - you have two sets of keys when you create your profile.
- A private key, made only for yourself, and is only kept for yourself. This key can be used to access your public key anywhere too, so you can decrypt messages that people write to you.
- A public key is the key that you would use or distribute if you want to be contacted, or if you've signed your message (there'll be more about this later in the post).

When you want to contact someone, to tell "the secret" (or just a standard message) you'll need their public key. You'll encrypt your message with their public key, meaning that only they can read (decrypt) your message.
Later in the post I'll show you where to find it on one of the markets available.. But else, it should be fairly easy to find other people's public keys on the various sites, if not - ask them! Send them a message asking for their key, there's nothing illegal in that. But they'll surely have one laying around their vendor-profile or whatever...

I've tried to make the post as noob-friendly as possible, as I was confused myself when I started using PGP for encrypting my messages. This will hopefully get some people going - if you find this useful, please share it with your friends or whatever.


1) But, first off - you would have to download the "GPG4Win" here:




__________________________________________________

2) Then, when you've downloaded the Gpg4win, please find the .exe-file:




__________________________________________________

2.1) When found, please launch the .exe-file, and select your preferred language:





__________________________________________________






2.2)  Continue to this screen, and select these exact applications:
  




__________________________________________________


2.3) I'm not really sure if you need "Kleopatra" and "GpgOL", but whatever, you can't really loose anything by installing it - but! Press "Next" until it starts installing:
  

2.4)  Finish it up, don't read the readme-file if you don't know what is about.. Well! It's time to get going with the PGP encryption..


__________________________________________________


3) Find the program that you've just installed, named "GPA" - the icon looks like this, and the default install directory is: "XX:\Program Files (x86)\GNU\GnuPG\gpa.exe" (this is from a 64-bit system..).




__________________________________________________



3.1) Open the application, and you'll (hopefully) see this window:



__________________________________________________


3.2) Press the "Generate key now" button, and you'll see this:


__________________________________________________

3.3) For your name, just enter something .. It doesn't matter, unless you're a vendor or something. Just put something that CAN NOT be related to your-self (if you want to use PGP for illegal services that is) - example:



__________________________________________________


3.4) Press the "Forward" button, and you'll see this - again just put something fake in. If you have a fake email, use that.. But it doesn't matter AT ALL! You'll not have to use the e-mail at all. So I just entered something useless, once again:


__________________________________________________

3.5) The next step is creating a back-up key - I would suggest doing this immediatly.. Put it somewhere safe. A place where it's not to be touched by anyone but yourself. This backup key will be the access to YOUR key/'profile' .

3.6) It will ask you for a password - and REMEMBER THIS! It's very important that you remember this password.


__________________________________________________


3.7) The result should look something like this:
  


__________________________________________________


3.8) THE APPLICATION WILL NOW CRASH! Seriously, this happens EVERY time you create a new key. But don't worry, it wont do anything to your key or your security. Just close it, and re-open it.

__________________________________________________

4) After opening it again, you should see a windows looking like this:


__________________________________________________

4.1) You're actually ready to find your first public key - this will be provided by your vendor. An example could be from the new Sheep Marketplace - I'm only showing the vendors public key:


__________________________________________________

4.2) You can find this on the bottom on a vendors page - let me show you (with censoring the vendors name):


__________________________________________________

4.3) Then you'll have to copy paste everything from the top, to the bottom:

__________________________________________________

4.4) And then paste it into the GPA-application (using CTRL-V)! And then it'll say:

__________________________________________________

4.5) You'll see that a new contact has been added to the program:

__________________________________________________

4.6) This will be your vendors Public-key, where you can write messages to him that only HE can read.. I'll now show you how.

__________________________________________________

5) Click on the icon "Clipboard", in the GPA application:

__________________________________________________

5.1) Write your address here, or whatever you need to send to your vendor .. This could be the format of your message, but you're free to choose.. But please use an address-format that you know works for your country:


__________________________________________________

5.2) Click on the "Encrypt" button - and this windows should hopefully open:

__________________________________________________

5.3) Select the vendor you want to contact. Usually they use the same username on the PGP service as they do on the markets.. So it should be easy for you selecting who you want - in my (this) case, I'll take the only one available! - Try to click on his/hers name:

 __________________________________________________

5.4) When you've clicked the right one - then click on the "OK". 
5.4.1) DON'T PRESS THE "SIGN" BUTTON
  __________________________________________________

5.5) If you press the "Sign" button, the vendor will also need your public key, and .. We don't really want that. You should always only use your vendors public key - no need to share your own.. Unless you want this! I'll tell more about this in the bottom of this guide.. 
For now, just press the "OK" button!

__________________________________________________

5.6) When you've pressed the "OK" button, you should see this box, asking if you've chosen the correct recipient / receiver for the message - it'll look something like this:

__________________________________________________

5.7) Press the "Yes" button, and you should see your text encrypted. It may ask for your password from "step 3.6" - but it may not too. It seems that if you sign the message, you would have to use your password to sign the message.  But here is my text, encrypted:
__________________________________________________

5.8) And that's it! Just copy and paste this text, and send it to your preferred vendor (when ordering). I'll not explain in this post how to do exactly that.. You'll have to find that out yourself. 
But now you can at least communicate with your vendor..!
 __________________________________________________

6) As said, paste this in a message to your vendor, e.g. 
 __________________________________________________


And you should be just fine. As said, I would describe a little more about the "signing" of your message. To do this, I would have to explain this first:

When you use PGP, you have:
1) A private key (the backup key from step 3.5)
2) A public key (that people can use to contact you only)

When you contact a vendor, you'll use his/hers public key . This will make the communication only readable by him, after the encryption (at step 5.6 // 5.7) - not even you can decrypt it. Only the one with the right private key for the right public key can read the message.
If you ended up clicking on the "sign" button, the vendor (or the receiver of your message) would need your public key to decrypt it. This is of course the safest, but there's no need of publishing your public key if you don't need to be contacted..

This means, that if you want to contact someone through PGP, you'll need their public key, and that's it. You open the clipboard, enter your address or whatever you need to send, encrypt it and then send the encrypted information. It's super stupid not to do this while doing illegal business, so I wanted to make a step-by-step guide.. And here it is.


This means that no one can "sniff" on your address, except the vendor. Vendors usually have policies regarding keeping addresses. Most of them destroys the encrypted message the minute after they've printed out the address-label for the package. 


I'll hopefully add more useful security guides to this blog, getting the information out there. A lot of people are afraid to use PGP because they're thinking: "Ahh it's too hard, I'll just stick with Privnote or just send my address unencrypted" - and that's truely sad. 
Privnote is nice, but uses Javascript which can be (if done by professionals) traced back to an IP or something alike. It's atleast best not to use Privnote, and only stick with PGP.